Specifications:

CNC Router Machine Full Kit Screw Driven/2.45N.m Stepper Motors/Silver Extrusion

DDCS4 V3.1 Offline Controller Bundle with MPG
2.2KW 220V Water Cooled Spindle
Frame Size: 1500 x 1500mm
Working Area: 1300 x 1270mm
Drive System: ACME Lead Screws
Linear Guides: Polycarbonate wheels on anodised C-Beam V-Slot Extrusion
Accuracy: 0.05 - 0.10mm (Screw Driven)
Cable Drag Chain Bundle

This Full Kit Includes:
CNC Mechanical Kit
4 x Nema23(2.5N.m) Stepper Motors
Cable Drag Chain Bundle
Wiring Cable Kit
DCS4 V3.1 Offline Controller Bundle with MPG Controller
2.2kW Water Cooled Spindle Bundle
All Extrusions are M5 Tapped as where it is necessary

Specs of Nema 23 Stepper Motor:
NEMA 23
Shaft Size: 8mm
Step Angle: 1.8°
Holding Torque:  2.5N.m
Rated voltage:  3.6V
Rated current:  3A

Specs of 2.2 kW Water Cooled Spindle:
Net weight: 5.3kg/6.2kg
Spindle Spec: φ 80 x 210mm/φ 80 x 235mm
Power: 2.2 kW
Voltage: 220 ~250 V
Frequency: 400 Hz
Speed: 0-24000 R/min
Water Cooling
Run-out off: less than 0.005 mm
Grease Lubrication
VFD Inverter 2.2KW 220V
Collet: ER20
Sizes: 1mm, 2mm, 1/8″, 4mm, 5mm, 6mm, 1/4″, 7mm, 8mm, 9mm, 10mm, 11mm, 1/2″, 13mm