Overview

The 8HP-CAPLCD Monitor is a small, high-resolution, wide-color gamut general-purpose capacitive touch monitor compatible with most standard HDMI devices.
Comes with an aluminum alloy case, toughed glass panel, excellent display performance, and smooth multi-touch effect.
Features

8-inch wide-color gamut IPS panel, 1280 x 800 hardware resolution.
Supports standard HDMI and full-featured Type-C display signals
10-point capacitive touch, toughened glass panel with 6H hardness.
Adopts optical bonding technique for better display.
Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor.
Multi-language OSD menu support (for power control, adjusting brightness/contrast, etc.)
Supports HDMI/Type-C audio output, onboard 3.5mm headphone jack, and 4PIN speaker jack.

Specification
Model: 8HP-CAPLCD Monitor
Size: 8.0 Inch
Viewing Angle: 178 Deg
Resolution: 1280 x 800 Pixels
Overall Dimension: 196.00(H) × 121.00(V) × 11.6(D) mm
Display Dimension: 114.66(H) × 184.16(V) mm
Display Area: 107.64(H) × 172.22(V) mm
Pixel Pitch: 0.13455(H) x 0.13455(V) mm
Color Gamut: 82% NTSC
Max. Brightness: 300 cd/m²
Contrast: 1200:1
Backlight Adjustment: OSD or DDC/CI
Refresh Rate: 60 Hz
Display Interface: Standard HDMI port or full-feature Type-C connector
Power Port: 5V Type-C
Power Consumption: 4 Watt
Weight: 623 g
Electrical Parameters
Input Voltage: 4.75 5.00 5.25 V
Input Current: 750 800 TBD mA
Operating Temperature: 0 25 60 ℃
Storage Temperature: -10 25 70 ℃

•Note 1: Input voltage exceeding the maximum value or improper operation may cause permanent damage to the device.
•Note 2: The input current should be ≥750mA, otherwise it will lead to start-up failure or abnormal display, and a long time in an abnormal state may cause permanent damage to the device.
•Note 3: Please do not put the display in a high temperature and high humidity storage environment for a long time, the display needs to work within the limit value, otherwise it will be possible to damage the display.
EDID Sequence Parameters

If the system of the main control board can automatically recognize the EDID for display, there is no need to set the relevant timing parameters additionally.

Otherwise, you can refer to the following EDID settings:
Pixel Clock     H Addressable     H Blanking     V Addressable     V Blanking     H Front Porch     H Sync Width     V Front Porch     V Sync Width     H Image Size     V Image Size     H Border     V Border
77.00     1280     232     800     56     160     32     20     6     294     165     0     0
Interface Introduction

8HP-CAPLCD Monitor02.png
User Guide
Working With PC
Support Windows 11/10/8.1/8/7

How to Use

Connect the Touch port of the LCD to the USB interface of the PC, and Windows will automatically identify the touch function.
Connect the LCD's HDMI interface to the PC's HDMI interface, and Windows will automatically identify the display function.

Note:
Some PCs do not support HDMI devices plug-and-play, usually after rebooting the system can be used normally.
If the power supply via the USB interface is insufficient, the LCD will flicker. After connecting the external 5V 1A power adapter to the LCD's Power port, it can be restored to normal use.

Windows Software Brightness Adjustment

1. Download and install DDC/CI applications, such as the open-source Twinkle Tray.
2. Open the software dimming icon, it will identify the Waveshare monitor and adjust the monitor backlight brightness by sliding the scroll bar.

8HP-CAPLCD Monitor04.png

3. You can also enter the DDC/CI application settings screen to enable contrast adjustment, volume adjustment, and other functions.

Windows Touch Calibration

Take Windows 10 as an example:

1. Enter the Windows setting of the system, type in the search bar, and click "Calibrate the screen for pen or touch input" (as shown in the picture below):

2. Click "Setup" in the pop-up "Tablet PC Settings" interface:

3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.

【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Win10 touch03.png
Working with Raspberry Pi
Hardware Connection

Connect the Touch port to the USB port of the Raspberry Pi.
Connect the HDMI interface to the HDMI interface of the Raspberry Pi.

Using the matching dual-plug Type-C cable, connect the monitor's DISPLAY&TOUCH connector to the master's full-featured Type-C connector. Wait for a few seconds to enter the display interface.
8HP-CAPLCD Monitor 06.jpg
Note: Please make sure your main control supports a full-featured Type-C interface and your phone needs to support the wired projection function.

For more info: https://www.waveshare.com/wiki/8HP-CAPLCD_Monitor