This six legged robot spider chassis is designed to be used with our SG90 9g micro servo. Each leg supports a total of 3 servos which allows the legs a full 18 degrees of freedom meaning the completed robot will be able to walk, crab, turn and even climb over small obstacles. The kit comes supplied with a total of 25 black acrylic plastic parts and fixing screws.

Description:
- 18 DOF, flexible control
- Light weight, 308g (with servo)
- Acrylic laser cut
- Uses high performance 9g servo
- Supplied with cable tidy and fixing screws + servo mounting screws not normally supplied with kit.
- Size: 13.3(L)*20(W)*8.5(H)cm

Please note modifications and additional components may be required depending on hardware used. It is recommended that you check the ability of your controller and power supply to drive all the servos required for this kit.

This bundle comes with 18 of our SG90 servos:

Dimension: 22mm x 11.5mm x 22.5mm
Net Weight: 9 grams
Operating speed: 0.12second/ 60degree ( 4.8V no load)
Stall Torque (4.8V): 17.5oz /in (1kg/cm)
Temperature range: -30 to +60
Dead band width: 7usec
Operating voltage: 3.0V~7.2V
Coreless motor
All nylon gear
Dual ball bearing
Connector wire length 150mm