CNC Kit 2.2kw Spindle ER20, VFD, Clamp and Pump
Specification:
KIT Includes:
1. 2.2kw spindle Water Cooled Kit ER20 Milling
2. 2.2KW VFD
3. Water Pump
4. 80 Clamp
5. 13pcs ER20
1. CNC Spindle Motor
Size:80mm
Power:2.2KW
Voltage:220V
Frequency:0-400Hz
Speed:0-24000rpm
Water Cooling ER20 collet
Runout off:less than 0.005mm
Grease Lubrication
Bearing: 4pcs bearing C7005X2 C7002X2
2.Inverter
Type:2.2KW/220V
Input:220VAC/50Hz
Output:0-220VAC 3-phase
Frequency:0-400Hz
the parameter of the inverter is :
PD005=400
PD004=400
PD003=400
Note: If there is no problem, please do not change the parameters of the inverter.
3.water pump
AC Voltage: 220v-240v/50hz
Flow: 3500L / h
Power: 80w
Qmax:3500L/H
Structure:single-stage pump
Pressure :high pressure
Don't operate without water.
​Caution:read the instrution carefully before using !
5M Water Pipes: 6mm (ID)*8mm (OD)
4.Spindle Motor Clamp :
Diameter: 80mm
Material: Aluminum, Surface sandblasted
5.ER20 Collet 1 Set:
Gripping Range: 1MM to 13MM (1,2,3.175,4,5,6,7,8,9,10,11,12.7,13mm)